Trikdis E16T Ethernet universal communicator - IP module

Trikdis E16T Ethernet smart communicator can connect to any alarm panels telephone line (TIP RING) terminal for event transmission via wired Internet.

Communicator also works with Protegus 2 Android / Iphone and web app. With Protegus 2 users can control their alarm system and appliances remotely and get notifications about security system events. Communicator can transmit event notifications to the Central Monitoring Station and work with Protegus 2 simultaneously.

Communicator transmits full event information to the Central Monitoring Station.

The Trikdis E16 * and E16T communicators are excellent replacement for the Paradox IP150+ IP module and DSC ENVISA LINK4 Ethernet communicator.

What does Trikdis offer?

• Reliable operation
• Free Android, Iphone and web applications
• *Direct connection to the alarm panel - no manufacturer besides the original can do this
• Remote control (arming / disarming)

Main features:

• Ethernet, IP-based communicator
• Connects to control panel to telephone line (TIP-RING) terminals.
• When Protegus 2 service is enabled, events are first delivered to CMS, and only then are sent to app users.
• No fixed IP nor dynamic DNS is required, the messages are transmitted by the Protegus 2 server securely

Notifies users:

• Users are notified about events and can control the system via the free Protegus 2 Android / Iphone and web app
• “Push” and special sound notifications informing about events.
• Remote system Arm/Disarm using key switch zones.

Controllable outputs:

• 3 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.
• Outputs controlled by the Protegus 2 app.
• Add additional inputs and controllable outputs with iO expanders via RS485 port
• Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).

Quick setup:

• Settings can be saved to file and quickly written to other communicators.
• Two access levels for configuring the device for CMS administrator and for the installer.
• Quick and easy configuration and firmware updates via USB or remotely after initial setup with Trikdis programming software.

Central monitoring station:

• Sends events to Trikdis software or hardware receivers that work with any monitoring software.
• Can send event messages to universal SIA DC-09 and SUR-GUARD TL150 receivers
• The module transmits the messages of the control panel to the monitoring station in Contact ID code format
• Connection supervision by polling to IP receiver every 30 seconds (or by user-defined period).
• Backup channel, that will be used if connection with the primary channel is lost.
• With parallel communication channels events can be sent to two receivers at the same time.

E16 Ethernet smart communicator with direct control.

Take advantage of smart features and direct control!

Alarm panels connectable via data bus or serial port

The Trikdis E16, G16, and GET can be used with all alarm panels listed below. In such connections, events are received by the Trikdis communicator via the data bus or serial port.

Among these, models directly controllable are marked in red. For other panels, the establishment of key-switch zones is required for control.

Spectra SP4000, SP5500, SP5500+*, SP6000, SP6000+*, SP7000, SP7000+*, SP65, 1727, 1728, 1738
Magellan MG5000, MG5050, MG5050+*, MG5050E
DIGIPLEX EVO48, NE96, EVO96, EVO192*, EVOHD* (*Fw. 7.50 or above)
ESPRIT E55, 728ULT, 738ULT
Firmware PARADOX control panels, which are directly controlled, must be V.4 or higher.
* The serial port on the marked NEW alarm panels is factory-locked. Serial port unlocking must be performed to communicate with any external devices. How to unlock Serial Port

PC585, PC1565, PC1616, PC1832, PC1864, PC1404, PC5015, PC5020

NetworX (Caddx) NX-4v2, NX-6v2, NX-8v2, NX-8e

Premier 24, 48, 88, 168, 412, 816, 832, 832+
Premier Elite 12, 24, 48, 64, 88, 168

Inception

Ademco Vista-15, Ademco Vista-20, Ademco Vista-48

Runner 4/8, 8/16